The gantry milling machine comprises a bed, a worktable mounted on the bed and a numerical control circuit control system. A gantry is erected on the movable span above the worktable, and the gantry also includes a gantry carriage, which is clamped on the x-axis guide rail. The z-axis guide rail is installed on the gantry. The crossbeam is provided with a Z-axis carriage, the crossbeam is movably clamped on the z-axis guide rail through the z-axis carriage, and the crossbeam is also provided with a Y-axis guide rail.

In modern society, the use of gantry milling machine is very common, especially in recent years, several high-precision machine tools have been developed. But also because of this, people for his maintenance problems have been ignored, causing gantry milling machine work is frequent problems. Now let's talk about what's going on.

When we use gantry milling machine for operation, we must strictly follow the corresponding procedures to operate, but also check the voltage and power grid. If we boot five minutes later show that everything is OK, then we can start normal operation. To turn on the automatic lubrication system, in order to see if the guide rail has done a good job in protection, but also to wipe oil, when the machine is shut down, but also to remove the dirt generated by the machine, but also to wipe oil on the guide rail and the workbench, and then turn off the power supply, only pay attention to the details can we have the high accuracy of the gantry milling machine.

Generally speaking, the high efficiency of this machine tool depends on its cutting capacity. Of course, the power of the gantry milling machine depends on the engine, and its screw rod should not be forgotten. If the screw rod does not meet the requirements or is too thin, the power will increase and the speed will be very fast. At this time, its cutting capacity will be relatively large, But the screw rod may break, so we have to consider its bearing capacity.