CNC gantry milling machine, gantry machining center
Shenzhen FANA CNC Machine Tool Co., Ltd
Address: 12b, Shenyun village, Shenyun Road, Nanshan District, Shenzhen
Dongguan factory address: No.2, old airport road, Baisha village, Humen Town, Dongguan City
Tel: +86 0755-29065502
Contact person: +86 13688807582
Email: export@fanacnc.com
mechanical properties
The x-axis is moved by an integral gantry frame. The driving torque is not affected by negative force, and the machine tool has sensitive response and good dynamic characteristics. Compared with the mobile layout products of worktable, this series of products have strong carrying capacity and significantly reduced floor area. Two AC servo motors are used in both sides of X direction, and gear reducer and rack of machine bed are used to realize double servo mechanical and electrical clearance elimination of gantry shaft with higher accuracy. Full closed loop control ensures the positioning accuracy and accuracy stability of the machine tool. It can be equipped with a variety of automatic or manual accessory milling heads. After one-time clamping, the parts can be automatically processed on five sides. It can also be equipped with vertical and horizontal compound tool magazine to automatically replace the automatic right angle head and automatic extension head, so as to realize automatic processing and greatly improve the work efficiency.
technical parameter
T-groove (width x spacing x quantity)
model | FA16046HMD | FA23060HMD | |
Table size | mm | 16000x4000 | 23000 x4800 |
mm | 28 | 28 | |
Max capacity | Kg | 35000 | 35000 |
X-axis stroke | mm | 16000 | 23000 |
Travel Y-axis | mm | 4600 | 6000 |
Z-axis stroke | mm | 1400 | 1400 |
Distance between spindle end face and worktable | mm | 200-1600 | 200-1600 |
Distance between two columns | mm | 4600 | 5500 |
Taper of spindle nose | BT50 | BT50 | |
Spindle speed | r/min | 6000 | |
Spindle power | 22/26 | 22/26 | |
Triaxial torque | NM | 40/40/40 | 40/40/40 |
Fast moving speed | m/min | 8/8/8 | |
Cutting feed rate | m/min | 6 | 6 |
X-axis guide configuration | 4 65 roller linear guides | ||
Y-axis guide rail configuration | Three 65 roller linear guides | ||
Z-axis guide rail configuration | 4 65 roller linear guides | ||
positioning accuracy | mm | +0.02 | |
Repeat positioning accuracy | mm | +0.001 | |
Net weight | Kg | 18000 | 26000 |
Power supply | KVA | 80 | 80 |
Numerical control system | Standard | Siemens 840D |
Optional configuration:
1. Right angle milling head
2. On line measurement
3. Rotary table
4. Grating ruler
5. Ethernet transmission